Hardware support – Nautilus® CC plus

Here you receive the latest software for the Nautilus® CC plus universal casting unit as well as further useful information. To install the software, instructions are available in German and English.


Updates for Nautilus® CC plus
The software versions available in the casting unit can be called up using the F3 ley
(call up "Software info")

From year 2012

Software updates for Nautilus® units with touchscreen – from year 2012
Software updates Version Size Language
setup_DE.zip 1.34 6,66 MB German
setup_EN.zip 1.34 6,65 MB English

Year to 2012

Software updates for Nautilus® units without touchscreen – year to 2012
Firmware Version Size Language
firmware_v122_DE.zip 1.22 430 KB Deutsch
firmware_v122_EN.zip 1.22 430 KB Englisch

The Firmware controls the basic functions of the casting unit.

CastControl

The program for using NautiCard on a PC.
The version of CastControl is indicated in the header in the running program.

CastControl
Version Siize Language
CastControl_21_DE.zip 2.1 6,72 MB German
CastControl_21_EN.zip 2.1 6,93 MB English

Driver for the card reader

Eliminates errors that may occur during communication between CastControl and the card reader. From CastControl version 2.0 and up, a driver update is not necessary.

Driver for the card reader
Version Size Language
Chipdrive_Update.zip 20.08.2005 776 KB German/English

Serviceware

The Serviceware provides analytical tools for service technicians.

Serviceware
Version Size Language
Serviceware_V112_DE.zip 1.12 428 KB German
Serviceware_V112_EN.zip 1.12 428 KB English

Cahnges

Version 1.06: 

  • Additional function: "Check O-ring seals"
    ATTENTION: Requires language version V 1.07. or higher!

AlloyDatabase

This database for alloys only concerns BEGO alloys. When the update is copied on the casting unit, all customer data for non-BEGO alloys are preserved.

AlloyDatabase
Version Size Language
Alloy_database_V106_DE.zip 1.06 410 KB German
Alloy_database_V106_EN.zip 1.06 410 KB English

LanguageDatabase

The database for languages controls the display messages of the casting unit.

LanguageDatabase
Version Size Language
Language_database_V110_DE.zip 1.10 415 KB German
Language_database_V110_EN.zip 1.10 415 KB English

Instructions

Download and installation on PC

  • Click on the download link and save the file in the target folder of your choice.
  • Decompress the file with a suitable program (e.g. WinZip).
  • Start the installation program by clicking on the file with the extension "exe".Important (concerns ''CastControl''): Prior to reinstallation deinstall the existing program "BEGO CastControl" using the Windows Control Panel.
  • Follow the instructions of the installation program

Installation on the Nautilus® CC plus
Switch on Nautilus® CC plus and as soon as the words "Nautilus® CC plus" appear on the display, press the button with the card symbol. Either confirm the subsequent prompt regarding "Update Firmware" with "OK" or select "No" to proceed to the desired update (e.g. software). The unit will then guide you through the installation procedure.

Software on CD-ROM
A CD-ROM with the CastControl software can be ordered using order number 16259.

Contact
BEGO-Service:
Phone +49 421 2028-270 (international), +49 421 2028-270 (Germany)
Email: support.nautilus@bego.com

Disclaimer of liability

The downloads are designed for use with the BEGO Nautilus® CC plus casting unit. Use for other purposes and any changes to the programs are not permitted.
Software shall be downloaded from the download section at the user’s own risk. BEGO cannot be made liable if direct or indirect damage occurs during use of the downloads.

Service contact

BEGO-Service:
Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG
Wilhelm-Herbst-Str. 1
28359 Bremen
Germany

Telephone:
+49 421 2028-270 (international)
+49 421 2028-270 (Germany)

Email: support.nautilus@bego.com

BEGO Hardware service