Here you receive the latest software for the Nautilus® CC plus universal casting unit as well as further useful information. To install the software, instructions are available in German and English.


CastControl

The program for using NautiCard on a PC.
The version of CastControl is indicated in the header in the running program.

Updates for Nautilus® CC plus

The software versions available in the casting unit can be called up using the F3 key

(call up "Software Info").

The Firmware controls the basic functions of the casting unit.

Drivers for the card reader

Eliminates errors that may occur during communication between CastControl and the card reader. From CastControl version 2.0 and up, a driver update is not necessary.

Serviceware

The Serviceware provides analytical tools for service technicians.

Changes: 

Version 1.06:

• Additional function: "Check O-ring seals". ATTENTION: Requires language version V1.07 or higher!
  

AlloyDatabase

This database for alloys only concerns BEGO alloys. When the update is copied on the casting unit, all customer data for non-BEGO alloys are preserved.

Language Database

The database for languages controls the display messages of the casting unit.

INSTRUCTIONS

Download and installation

• Click on the download link and save the file in the target folder of your choice.

• Decompress the file with a suitable program (e.g. WinZip).

• Start the installation program by clicking on the file with the extension "exe".Important (concerns ''CastControl''): Prior to reinstallation deinstall the existing program "BEGO CastControl" using the Windows Control Panel.

• Follow the instructions of the installation program

Installation on the Nautilus® CC plus

Switch on Nautilus® CC plus and as soon as the words "Nautilus® CC plus" appear on the display, press the button with the card symbol. Either confirm the subsequent prompt regarding "Update Firmware" with "OK" or select "No" to proceed to the desired update (e.g. software). The unit will then guide you through the installation procedure.

Software on CD-ROM

A CD-ROM with the CastControl software can be ordered using order number 16259.


Contact

BEGO Service:
Tel. +49 421 2028-270 (international), (0421) 2028-270 (Germany)
E-mail: support.nautilus(at)bego.com


Disclaimer of liability

The downloads are designed for use with the BEGO Nautilus® CC plus casting unit. Use for other purposes and any changes to the programs are not permitted.
Software shall be downloaded from the download section at the user’s own risk. BEGO cannot be made liable if direct or indirect damage occurs during use of the downloads.