Eliminates errors that may occur during communication between CastControl and the card reader. From CastControl version 2.0 and up, a driver update is not necessary.
|Driver for the card reader|
|Download and installation on a PC|
|Installation on the Nautilus® CC plus|
Switch on Nautilus® CC plus and as soon as the words "Nautilus® CC plus" appear on the display, press the button with the card symbol. Either confirm the subsequent prompt regarding "Update Firmware" with "OK" or select "No" to proceed to the desired update (e.g. software). The unit will then guide you through the installation procedure.
|Software on CD-ROM|
|A CD-ROM with the CastControl software can be ordered using order number 16259.|
Tel. +49 421 2028-270 (international), (0421) 2028-270 (Germany)
The downloads are designed for use with the BEGO Nautilus® CC plus casting unit. Use for other purposes and any changes to the programs are not permitted.
Software shall be downloaded from the download section at the user’s own risk. BEGO cannot be made liable if direct or indirect damage occurs during use of the downloads.