Support - NAUTILUS® CC plus
Here you receive the latest software for the Nautilus® CC plus universal casting unit as well as further useful information. To install the software, instructions are available in German and English.
CastControl
The program for using NautiCard on a PC.
The version of CastControl is indicated in the header in the running program.
CastControl | |||
Version | Size | Language | |
2.0 | 6,72 MB | German | |
2.0 | 6,93 MB | English | |
2.1 | 6,72 MB | German | |
2.1 | 6,93 MB | English | |
Changes as compared to version 1.0:
- Improved card recognition
Changes as compared to version 2.0:
- Revision of some of the text output
Drivers for the card reader
Driver for the card reader | |||
| Version | Size | Language |
20.08.2005 | 776 KB | German/English | |
Eliminates errors that may occur during communication between CastControl and the card reader. From CastControl version 2.0 and up, a driver update is not necessary.
Updates for Nautilus® CC plus
The software versions available in the casting unit can be called up using the F3 key
(call up "Software Info").
Firmware | |||
Version | Size | Language | |
1.08 | 432 KB | German | |
1.08 | 432 KB | English | |
1.09 | 432 KB | German | |
1.09 | 432 KB | English | |
1.10 | 432 KB | German | |
1.10 | 432 KB | English | |
1.12 | 432 KB | German | |
1.12 | 432 KB | English | |
1.13 | 432 KB | German | |
1.13 | 432 KB | English | |
1.15 | 432 KB | German | |
1.15 | 432 KB | English | |
1.16 | 432 KB | German | |
1.16 | 432 KB | English | |
1.17 | 432 KB | German | |
1.17 | 432 KB | English | |
1.19 | 432 KB | German | |
1.19 | 432 KB | English | |
1.20 | 432 KB | German | |
1.20 | 432 KB | English | |
1.21 | 430 KB | German | |
1.21 | 430 KB | English | |
1.22 | 430 KB | German | |
1.22 | 430 KB | English | |
The Firmware controls the basic functions of the casting unit.
Changes as compared to version 1.07:
- The display of the casting temperature after each casting was extended from 2 to 10 seconds.
- Keyboard problems in manual casting were eliminated.
Changes as compared to version 1.08:
- Problem with text output eliminated
- Improved error detection of the pyrometer
Changes as compared to version 1.22:
- Two new service messages H77 for service checks after 10.000 casting cycles and H99 for changing of security-relevant parts after 50.000 casting cycles
Serviceware
Serviceware | |||
Version | Size | Language | |
1.06 | 428 KB | German | |
1.06 | 428 KB | English | |
1.07 | 428 KB | German | |
1.07 | 428 KB | English | |
1.08 | 428 KB | German | |
1.08 | 428 KB | Englisch | |
1.09 | 428 KB | German | |
1.09 | 428 KB | English | |
1.10 | 428 KB | German | |
1.10 | 428 KB | English | |
1.12 | 428 KB | German | |
1.12 | 428 KB | English | |
The Serviceware provides analytical tools for service technicians.
Changes:
Version 1.06:
- Additional function: "Check O-ring seals". ATTENTION: Requires language version V1.07 or higher!
Version 1.07:
- Problems (crash) during pyrometer test eliminated
Version 1.08:
- Pyrometer test during self-test can be skipped
Version 1.09:
- Tolerance of pyrometer test improved
AlloyDatabase
AlloyDatabase | |||
Version | Size | Language | |
1.02 | 412 KB | German | |
1.02 | 412 KB | English | |
1.03 | 412 KB | German | |
1.03 | 412 KB | English | |
1.04 | 412 KB | German | |
1.04 | 412 KB | English | |
1.06 | 410 KB | German | |
1.06 | 410 KB | English | |
This database for alloys only concerns BEGO alloys. When the update is copied on the casting unit, all customer data for non-BEGO alloys are preserved.
Changes as compared to version 1.0 as well as 0.99:
- Casting program for BEGO training alloy "Talmi" included.
- Adaptation of alloy compositions within the database
Changes as compared to version 1.05:
- Two new allows BegoStar ECO (programmes 167 and 174) and Pontonorm (program 119)
- Wirolloy has been removed from the database (previous program 194)
- Preheating temperature of ECO d’OR has been changed
Language Database
LanguageDatabase | |||
Version | Size | Language | |
1.08 | 416 KB | German | |
1.08 | 416 KB | English | |
1.09 | 416 KB | German | |
1.09 | 416 KB | English | |
1.10 | 415 KB | German | |
1.10 | 415 KB | English | |
The database for languages controls the display messages of the casting unit.
Changes as compared to version 1.06:
- Improvements in the display messages.
- Necessary for Serviceware 1.06 for function "Check O-ring seals"
Changes as compared to version 1.07:
- Errors in French language output eliminated
Changes as compared to version 1.09:
- Improvements in the display messages.
INSTRUCTIONS
Download and installation
- Click on the download link and save the file in the target folder of your choice.
- Decompress the file with a suitable program (e.g. WinZip).
- Start the installation program by clicking on the file with the extension "exe".Important (concerns ''CastControl''): Prior to reinstallation deinstall the existing program "BEGO CastControl" using the Windows Control Panel.
- Follow the instructions of the installation program
Installation on the Nautilus® CC plus
Switch on Nautilus® CC plus and as soon as the words "Nautilus® CC plus" appear on the display, press the button with the card symbol. Either confirm the subsequent prompt regarding "Update Firmware" with "OK" or select "No" to proceed to the desired update (e.g. software). The unit will then guide you through the installation procedure.
Software on CD-ROM
A CD-ROM with the CastControl software can be ordered using order number 16259.
Contact
BEGO Service:
Tel. +49 421 2028-270 (international), (0421) 2028-270 (Germany)
E-mail: support.nautilus(at)bego.com
Disclaimer of liability
The downloads are designed for use with the BEGO Nautilus® CC plus casting unit. Use for other purposes and any changes to the programs are not permitted.
Software shall be downloaded from the download section at the user’s own risk. BEGO cannot be made liable if direct or indirect damage occurs during use of the downloads.
