Service
Support – Nautilus® CC plus
Chipdrive + CastControl
Here you receive the latest software for the Nautilus® CC plus universal casting unit as well as further useful information. To install the software, instructions are available in German and English.
CastControl
The program for using NautiCard on a PC.
The version of CastControl is indicated in the header in the running program.
| Version | Size | Language | |
|---|---|---|---|
Changes as compared to version 1.0:
|
|||
| CastControl_20_Deutsch.zip | 2.0 | 6.72 MB | German |
| CastControl_20_English.zip | 2.0 | 6.93 MB | English |
| CastControl_21_Deutsch.zip | 2.1 | 6.72 MB | German |
| CastControl_21_English.zip | 2.1 | 6.93 MB | English |
Drivers for the card reader
| Version | Size | Language | |
|---|---|---|---|
| Eliminates errors that may occur during communication between CastControl and the card reader. From CastControl version 2.0 and up, a driver update is not necessary. | |||
| Chipdrive_Update.zip | 20.08.2005 | 776 KB | German/English |
Updates for Nautilus® CC plus
The software versions available in the casting unit can be called up using the F3 key (call up "Software Info").
| Version | Size | Language | |
|---|---|---|---|
| The Firmware controls the basic functions of the casting unit. Changes as compared to version 1.07:
|
|||
| Firmware_V108_Deutsch.zip | 1.08 | 432 KB | German |
| Firmware_V108_English.zip | 1.08 | 432 KB | English |
| Firmware_V109_Deutsch.zip | 1.09 | 432 KB | German |
| Firmware_V109_English.zip | 1.09 | 432 KB | English |
| Firmware_V110_Deutsch.zip | 1.10 | 432 KB | German |
| Firmware_V110_English.zip | 1.10 | 432 KB | English |
| Firmware_V112_Deutsch.zip | 1.12 | 432 KB | German |
| Firmware_V112_English.zip | 1.12 | 432 KB | English |
| Firmware_V113_Deutsch.zip | 1.13 | 432 KB | German |
| Firmware_V113_English.zip | 1.13 | 432 KB | English |
| Firmware_V115_Deutsch.zip | 1.15 | 432 KB | German |
| Firmware_V115_English.zip | 1.15 | 432 KB | English |
| Firmware_V116_Deutsch.zip | 1.16 | 432 KB | German |
| Firmware_V116_English.zip | 1.16 | 432 KB | English |
| Firmware_V117_Deutsch.zip | 1.17 | 432 KB | German |
| Firmware_V117_English.zip | 1.17 | 432 KB | English |
| Firmware_V119_Deutsch.zip | 1.19 | 432 KB | German |
| Firmware_V119_English.zip | 1.19 | 432 KB | English |
| Firmware_V120_Deutsch.zip | 1.20 | 432 KB | German |
| Firmware_V120_English.zip | 1.20 | 432 KB | English |
| Version | Size | Language | |
|---|---|---|---|
| The Serviceware provides analytical tools for service technicians. Changes: Version 1.06:
|
|||
| Serviceware_V106_Deutsch.zip | 1.06 | 428 KB | German |
| Serviceware_V106_English.zip | 1.06 | 428 KB | English |
| Serviceware_V107_Deutsch.zip | 1.07 | 428 KB | German |
| Serviceware_V107_English.zip | 1.07 | 428 KB | English |
| Serviceware_V108_Deutsch.zip | 1.08 | 428 KB | German |
| Serviceware_V108_English.zip | 1.08 | 428 KB | English |
| Serviceware_V109_Deutsch.zip | 1.09 | 428 KB | German |
| Serviceware_V109_English.zip | 1.09 | 428 KB | English |
| Serviceware_V110_Deutsch.zip | 1.10 | 428 KB | German |
| Serviceware_V110_English.zip | 1.10 | 428 KB | English |
| Serviceware_V112_Deutsch.zip | 1.12 | 428 KB | German |
| Serviceware_V112_English.zip | 1.12 | 428 KB | English |
| Version | Size | Language | |
|---|---|---|---|
| This database for alloys only concerns BEGO alloys. When the update is copied on the casting unit, all customer data for non-BEGO alloys are preserved. Changes as compared to version 1.0 as well as 0.99:
|
|||
| Alloy_database_V102_Deutsch.zip | 1.02 | 412 KB | German |
| Alloy_database_V102_English.zip | 1.02 | 412 KB | English |
| Alloy_database_V103_Deutsch.zip | 1.03 | 412 KB | German |
| Alloy_database_V103_English.zip | 1.03 | 412 KB | English |
| Alloy_database_V104_Deutsch.zip | 1.04 | 412 KB | German |
| Alloy_database_V104_English.zip | 1.04 | 412 KB | English |
| Version | Size | Language | |
|---|---|---|---|
| The database for languages controls the display messages of the casting unit. Changes as compared to version 1.06:
|
|||
| Language_database_V108 _Deutsch.zip | 1.08 | 416 KB | German |
| Language_database_V108 _English.zip | 1.08 | 416 KB | English |
| Language_database_V109 _Deutsch.zip | 1.09 | 416 KB | German |
| Language_database_V109 _English.zip | 1.09 | 416 KB | English |
Instructions
Download and installation
- Click on the download link and save the file in the target folder of your choice.
- Decompress the file with a suitable program (e.g. WinZip).
- Start the installation program by clicking on the file with the extension "exe". Important (concerns 'CastControl'): Prior to reinstallation deinstall the existing program "BEGO CastControl" using the Windows Control Panel.
- Follow the instructions of the installation program
Switch on Nautilus® CC plus and as soon as the words "Nautilus® CC plus" appear on the display, press the button with the card symbol. Either confirm the subsequent prompt regarding "Update Firmware" with "OK" or select "No" to proceed to the desired update (e.g. software). The unit will then guide you through the installation procedure.
Software on CD-ROM
A CD-ROM with the CastControl software can be ordered using order number 16259.
Contact
BEGO Service:
Tel. +49 421 2028-270 (international), (0421) 2028-270 (Germany)
E-mail: support.nautilus@bego.com
Disclaimer of liability
The downloads are designed for use with the BEGO Nautilus® CC plus casting unit. Use for other purposes and any changes to the programs are not permitted.
Software shall be downloaded from the download section at the user’s own risk. BEGO cannot be made liable if direct or indirect damage occurs during use of the downloads.