BEGO PMMA Multicolor

High-performance PMMA with color gradient for temporary restorations

BEGO PMMA Multicolor is an industrially dyed thermoplastic high-performance material with color gradient. It is suitable for the production of crowns and bridges with up to two pontics, including for restorations of a longer-term nature, as well as for metal-supported temporary restorations. The multicolor design has been adapted to the color gradient of natural teeth and thus enables aesthetically pleasing and cost-effective restorations to be produced.Thanks to the material structure, comprising highly developed copolymer carbon chains, the material is abrasionresistant, boasts good fracture resistance and flexural strength and is also resistant to the build up of deposits. BEGO PMMA Multicolor is ideal for both the anterior and posterior regions. The semi-permanent restorations are available in the color versions M01–M03.

Production of aesthetically pleasing and cost-effective long-term restorations
The multi-color design has been adapted to the color gradient of natural teeth
Very good fracture resistance and flexural strength
Abrasion- and color-stable
Can be veneered with commercially available veneering
Resistant to deposit formations and easy to clean

Indications

Crowns and bridges with
up to two pontics
Two-piece abutments
Two-piece individual healing posts

Contraindications

Undesirable biological reactions (such as allergies to material components) can occur in isolated cases. BEGO PMMA Multicolor restorations are contraindicated in case of known incompatibilities or known allergies to material components.

Shade chart

BEGO PMMA Multicolor restorations are available in three different shades. The following BEGO chart is available for selecting the shades and the corresponding final result according to the VITA* classical shade system:

Shade overview BEGO PMMA Multicolor M01 – M03

M01

M02

M03

Shade allocation BEGO PMMA Multicolor M01–M03 in accordance to the VITA* classical color system
A1	A2	A3	A3,5	A4	B1	B2	B3	B4	C1	C2	C3	C4	D2	D3	D4
M01	M01	M02	M02	M02	M01	M01	M02	M03	M02	M02	M03	M03	M01	M03	M03

Two-piece abutments and individual healing posts made of PMMA Multicolor are also available.

BEGO PMMA Multicolor composition and physical data
Chemical composition
Acrylic polymer methacrylate (PMMA)	≥ 82 – 86 %
The concentration of all pigments is	< 1%
Silicium dioxide	14 – 17 %

Material data
Elastic modulus	approx. 2,800 MPa
Flexural strength	> 80 MPa
Water absorption	corresponds to DIN EN ISO 10477
Solubility	corresponds to DIN EN ISO 10477

The technical / physical values given are typical measurement results and refer to samples produced in-house and the measuring instruments. Other measurement results may be obtained if the samples are manufactured differently and with other measuring instruments.

back to overview