BEGO PMMA Multicolor

High-performance PMMA with color gradient for temporary restorations

BEGO PMMA Multicolor is an industrially dyed thermoplastic high-performance material with color gradient. It is suitable for the production of crowns and bridges with up to two pontics, including for restorations of a longer-term nature, as well as for metal-supported temporary restorations. The multicolor design has been adapted to the color gradient of natural teeth and thus enables aesthetically pleasing and cost-effective restorations to be produced.Thanks to the material structure, comprising highly developed copolymer carbon chains, the material is abrasionresistant, boasts good fracture resistance and flexural strength and is also resistant to the build up of deposits. BEGO PMMA Multicolor is ideal for both the anterior and posterior regions. The semi-permanent restorations are available in the color versions M01–M03.

  • Production of aesthetically pleasing and cost-effective long-term restorations
  • The multi-color design has been adapted to the color gradient of natural teeth
  • Very good fracture resistance and flexural strength
  • Abrasion- and color-stable
  • Can be veneered with commercially available veneering
  • Resistant to deposit formations and easy to clean

Indications

  • Crowns and bridges with
  • up to two pontics
  • Two-piece abutments
  • Two-piece individual healing posts

Contraindications

Undesirable biological reactions (such as allergies to material components) can occur in isolated cases. BEGO PMMA Multicolor restorations are contraindicated in case of known incompatibilities or known allergies to material components.

Shade chart

BEGO PMMA Multicolor restorations are available in three different shades. The following BEGO chart is available for selecting the shades and the corresponding final result according to the VITA* classical shade system:

Shade overview BEGO PMMA Multicolor M01 – M03
M01
M02
M03
Shade allocation BEGO PMMA Multicolor M01–M03 in accordance to the VITA* classical color system
A1A2A3A3,5A4B1B2B3B4C1C2C3C4D2D3D4
M01M01M02M02M02M01M01M02M03M02M02M03M03M01M03M03

Two-piece abutments and individual healing posts made of PMMA Multicolor are also available.

BEGO PMMA Multicolor composition and physical data
Chemical composition  
Acrylic polymer methacrylate (PMMA) ≥ 82 – 86 %
The concentration of all pigments is < 1%
Silicium dioxide 14 – 17 %
Material data  
Elastic modulus approx. 2,800 MPa
Flexural strength > 80 MPa
Water absorption corresponds to DIN EN ISO 10477
Solubility corresponds to DIN EN ISO 10477

The technical / physical values given are typical measurement results and refer to samples produced in-house and the measuring instruments. Other measurement results may be obtained if the samples are manufactured differently and with other measuring instruments.

* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.

BEGO PMMA Multicolor corresponds to VITA* CAD-Temp®.

Pictures and illustrations are exemplary. Colors, symbols, design, and information on the labels and/or packaging shown may differ from reality.