Wirofine
Universal investment material for all applications in partial denture and combination technique, for gel and silicone duplication
- Can be heated rapidly or conventionally to 1,050 °C with ideal expansion values, offers the level of flexibility essential for the modern dental laboratory
- Rapid preheating up to 1,000 °C: Insertion temperature = final temperature – means a time saving of 20 % – 30 % in comparison to investment materials which have to be heated from 600 °C
- Ideal flow properties make for reliable, fatigue-free working, since even the finest areas are precisely reproduced
- The precision of the duplicate models, along with high edge strength, makes for an optimal accuracy of fit without timeconsuming finishing – ideal for combination work
- Can be used for all shapes of mould and wax-up geometries: Systemindependent whilst ensuring reliable, efficient processing
- Excellent deflasking properties thanks to the minimal reaction between the investment material and the alloy. The advantage for you: Time saving and economical use of blasting materials
- Free selection of duplicating method:
- Duplication with gel results in good model surfaces and cost effectiveness
- Combination with silicone duplication (e.g., Wirosil) facilitates maximum precision and time savings (no hardening necessary)
- Reliable expansion control for excellent fit results thanks to the special liquid BegoSol K
Begin of solidification (Vicat time)[min] | 6 |
Compressive strength after 1h [MPa] | 11 |
Linear thermal expansion [%] | 0.8 |
Mixing liquid | BegoSol® K/BegoSol® |
Shelf-life in sealed portion sachet (month) | 24 |
Working time at 20° C approx. [min] | ca. 3 Min. 30 Sek |
Contact