BEGO Semados® SC/SCX-Implants

Tried and tested aspects of the BEGO Semados® S-Implants remain unchanged in the SC/SCX implants:

  • The cylindrical geometry of the implants is preserved.
  • BEGO Semados® SC/SCX implants can be implanted in all jaw regions and all bone qualities. They are recommended for the following applications in particular: in the upper and lower jaw, for D1 and D2 bone qualities, with sufficient bone volume, for sinus augmentation to protect against inadvertent perforation of the Schneiderian membrane
  • The SC/SCX implants are available in the standard diameters (3.25/ 3.75/ 4.1/ 4.5/ 5.5 mm) and lengths (7/ 8.5/ 10/ 11.5/ 13/ 15 mm) of the S-implants.
  • The BEGO Semados® SC-implants feature the established machined shoulder with a micro-roughness comparable to natural dental enamel (Ra ≈ 0.4).
  • The trusted surgical process / the surgical preparation with the BEGO Semados® S-Line TrayPlus remains. The existing processing instruments can still be used.
  • Individual treatments, made of a range of materials, can be obtained as usual via the CAD/CAM supported production of BEGO Medical.

Modern discoveries lead to optimisation:

  • The thread design and the cutting groove of the self-tapping thread of the S-implants have been revised.
  • The progressive microthread in the implant shoulder region to generate defined compression of the crestal bone and increased bone contact rate has been optimised.
  • The SCX implant has a structured shoulder and responds to the individual needs of the patient treatment and the preferences of the practitioner.
  • The implant shoulder surface of the SC/SCX implants has been adapted to the Platform Switch Design of the BEGO Semados® RS/RSX implants, so that all standard PS prosthetics components are available to the user.
  • The range is extended with an implant measuring 5.5 mm in diameter and 7 mm in length. To treat cases, where there is low vertical bone height, and where augmentation is not to be performed.