VarseoSmile Temp

The tooth-colored resin for 3D printing of temporary crown and bridge restorations, inlays, onlays, and veneers

Advantages for the laboratory

  • Specially for the resin developed printing and processing parameters ensure an accurate fit and smooth production workflows with reproducible results at any time
  • Easy finishing due to the the smooth surfaces of the printed objects
  • Wide range of indications up to 7-unit bridges with a maximum of one pontic width
  • Objects that have already been printed can be supplemented and repaired while maintaining original stability with VarseoSmile Temp or will simply be reprinted due to low material costs
  • Extremely short fabrication times and low material consumption equate to cost-efficient production in the laboratory
  • Three shades according to the proven VITA* classical shades: A2, A3, C2
  • FDA 510(k) cleared and fulfills all the requirements for a Class II medical device**

Advantages for the patient

  • The finished restoration can be attached using conventional temporary cements
  • High biocompatibility – not cytotoxic, not genotoxic, not toxic, non-irritating, and non-sensitizing
  • Esthetic temporaries with up to 12 months wear time
Product details
Color A2, A3, C2, Bl
Density approx 1.4 – 1.5 g/cm³
Viscosity 2,500 – 6,000 mPa∙s
Flexural strength ≥ 100 MPa
Availability
Availability Contents* REF
VarseoSmile Temp A2 500 g bottle 41022
VarseoSmile Temp A3 500 g bottle 41023
VarseoSmile Temp C2 500 g bottle 41024
VarseoSmile Temp BL 500 g bottle 41026
VarseoSmile Temp A2 250 g bottle 41102
VarseoSmile Temp, A3 250 g bottle 41103
VarseoSmile Temp, C2 250 g bottle 41104
VarseoSmile Temp BL 250 g bottle 41106

* The use of the 250 g bottles is recommended for the Varseo XS 3D printer.

3D Printers – for Processing BEGO 3D Printing Materials

BEGO Varseo XS

Compatible 3D Printers at a Glance

More 3D printing materials

VarseoSmile TriniQ

VarseoSmile
Crown plus

VarseoSmile Temp

VarseoSmile Teeth

VarseoWax Model

VarseoWax CAD/Cast

VarseoVest P plus

VarseoVest C&B

* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.

** Medical device as defined by section 201(h) of the Food, Drug & Cosmetic Act

Images and illustrations are examples. Colors, symbols, designs, and information on the depicted labels and/or packaging may differ from reality.

VarseoSmile Temp is distributed by Formlabs as: Temporary CB