BEGO Titan Grade 4

Milled crowns and bridges for ceramic veneering

  • Pure titanium – free of nickel, cadmium, beryllium, and lead
  • Can be veneered with ceramic compounds for titanium and with polymeric veneer materials
  • Very good mechanical properties: high strength, low weight, high resistance to corrosion, and low heat conductivity
  • Biocompatible, no allergenic effect
  • High bond strength as defined by EN ISO 9693-1
  • Can be laser welded

Indications

  • Frames for partially and fully veneered solutions with up to 16 units and up to three pontics
  • Fully anatomical crowns and bridges with up to 16 units and up to four pontics
Chemical composition
Ti 100.0 %
Alloy characteristics
Density 4.5 g/cm³
Modulus of elasticity 125 GPa
0.2% elongation limit (Rp0.2) 635 MPa
Tensile strength (Rm) 755 MPa
Ductile yield 20 %
Hardness (HV 10) Approx. 225
Coefficient of thermal expansion (RT – 500°C) 9.1 10-6K-1

Images and illustrations are examples; colors, symbols, designs and information on the depicted labels and/or packaging may differ from reality.