New from BEGO: Angulated Screw Channels for One-piece Single-tooth Restorations for Semados® Implants

With the angulated screw channels for one-piece CAD/CAM-fabricated single-tooth restorations from BEGO, the alignment of the screw access channel within the prosthetic restoration can be individually selected from 0° to 20° to the implant position.

This enables optimum occlusal exit of the screw channel in the anterior and posterior region even in difficult and aesthetically demanding situations. The one-piece CAD/CAM-manufactured single-tooth restorations (BEGO CADAbut Full) with angulated screw channels are available in the materials BEGO Titan Grade 5 and Wirobond® MI+.

For the following Semados® implant series, in addition to restorations with straight screw channels, restorations with angulated screw channels are now also available:

  • Series 0.1 BEGO Implant Systems – Semados® S implants
  • Series 0.5 BEGO Implant Systems – Semados® SC/SCX/RS/RI implants

For the prosthetic screw used in connection with the angulated screw channel, a special screwdriver (DYNAMIC ABUTMENT* screwdriver L24) must be used, which can be ordered from BEGO Medical under the reference number 549539. It should be noted that the specifications for the respective tightening torques for the prosthetic screws of the angulated screw channels differ from those for the straight screw channels.

Further information – also on one-piece bridge and bar restorations with angulated screw channels – can be found in the BEGO Interface Overview and the Prosthetic Components & CADPositioner Overview.

* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.

BEGO now offers angulated screw channels for one-piece single-tooth restorations in which the orientation of the screw access channel within the prosthetic restoration can be individually selected from 0° to 20° to the implant position.
BEGO now offers angulated screw channels for one-piece single-tooth restorations in which the orientation of the screw access channel within the prosthetic restoration can be individually selected from 0° to 20° to the implant position.