Crown and bridge prosthetics

KATANA Zirconia UTML

The multilayer zirconia with glassy translucency
The full-ceramic high-performance program of BEGO Medical is expanded by the new multilayer KATANA Zirconia UTML (Ultra Translucent Multi Layered).

Learn more...

Indications

  • Fully anatomical crowns and bridges with up to 3 units and up to one pontics in the anterior region
  • Crowns and bridge frames for partially veneered solutions with up to 3 units and up to one pontics in the anterior region
  • Inlays, onlays, partial crowns and veneers

BEGO PMMA Multicolor

High-performance PMMA with colour gradient
BEGO PMMA Multicolor is an industrially dyed thermoplastic highperformance material with color gradient. It is suitable for the production of crowns and bridges with up to two pontics, including restorations of a longer-term nature, as well as for metal-supported temporary restorations. 

Learn more...

Indications

  • Crowns and bridges with
  • up to two pontics
  • Two-piece abutments
  • Two-piece individual healing posts

BEGO Zirkon ST / BEGO Zirkon ST Multi

Super translucent zirconium dioxide for large restorations 

Learn more...

Indications

  • Fully anatomical crowns and bridges in the anterior and posterior regions with up to 16 units and a maximum of two pontics
  • Bridge frames for partially and fully veneered solutions in the anterior and posterior regions with up to 16 units and a maximum of two pontics
  • Inlays / Onlays / Veneers
  • Telescopic primary crowns
  • Dentine core crowns and bridges

BEGO Zirkon LT

The translucent zirconium dioxide for the highest aesthetic demands
The high-strength zirconium dioxide is suitable for one-piece and two-piece abutments, single-tooth restorations as well as bridge frames with up to 16 units. The impressive strength of the material facilitates the production of bridge frames with up to two adjacent pontics.

Learn more...

Indications

  • Frames for partially and fully veneered solutions with up to 16 units and up to two pontics
  • Two-piece abutments

IPS e.max* CAD

Strength and natural aesthetics
IPS e.max CAD is a lithium disilicate ceramic for CAD/CAM technology.

Aesthetic single-tooth restorations and 3-unit bridges, inlays, onlays or veneers are easy to produce from IPS e.max CAD with the aid of industrial production.

Learn more...

Indications

  • Single crowns (delivered in blue, precrystallized state)
  • Partial crowns, inlays, onlays, and veneers (delivered in blue, precrystallized state)
  • Three-unit bridges up to second premolar as terminal abutment (delivered in blue, precrystallized state)
  • Two-piece abutments for BEGO Semados® implants

Wirobond® C+

The cobalt-chrome alloy in the SLM procedure
The selective laser melting (SLM) procedure, co-invented and patented for the dental industry by BEGO, offers unrivalled quality in the production of metal frames.

Learn more...

Indications

  • Frames for partially and fully veneered restaurations with up to 16 units and up to four pontics
  • Fully anatomical crowns and bridges with up to 16 units and up to four pontics
  • Two-piece abutments
  • C&B tertiary frame
  • Retention per segment

Wirobond® M+

Milled restorations made of cobalt-chrome
High-speed cutting is the preferred technique for producing ac- curate Wirobond® M+ frames. The milling process is also used to produce double crowns and implant-based prosthetic restorations. Restorations made of Wirobond® M+ are characterised by a perfect fit with smooth surfaces and filigree occlusal surfaces.

Learn more...

Indications

  • Frames for partially and fully veneered restaurations with up to 16 units and up to four pontics
  • Fully anatomical crowns and bridges with up to 16 units and up to four pontics
  • One-piece abutments, bars, and occlusally screw-retained bridges

CAD/Cast® alloys

For the cost-effective alternative for producing your cast frames
A wide range of precious and non-precious alloys are available for the CAD/Cast® technique. In the BEGO production centre, wax patterns are milled in the computer-assisted process based on your CAD models. They are then invested and industrially cast in the materials of your choice using the vacuum pressure casting method. You are finally supplied with the cast frame.

Learn more...

Indications

  • Frames for partially and fully veneered solutions with up to seven units
  • Fully anatomical crowns and bridges with up to 7 units and up to four pontics
  • Two-piece abutments