IPS e.max CAD*
Lithium disilicate for restorations with natural esthetics and strength
- High-strength lithium disilicate glass ceramic with an end strength 360 MPa
- Three degrees of translucency with up to 16 shades for highly esthetic results
- Crystallization and glaze firing in one step – efficient and cost-effective at the same time
- Excellent esthetics with optional individualization
- Years of clinical experience and millions of restorations placed
- Please note: The color of the precrystallized MO blanks is different from that of the HT and LT blanks. This is normal and has no influence on the final result
Indications
- Single crowns (delivered in blue, precrystallized state)
- Partial crowns, inlays, onlays, and veneers (delivered in blue, precrystallized state)
- Three-unit bridges up to second premolar as terminal abutment (delivered in blue, precrystallized state)
- Two-piece abutments for BEGO Semados® implants
| Chemical composition | |
|---|---|
| SiO2 | 57.0 – 80.0 % |
| Li2O | 11.0 – 19.0 % |
| K2O | 0.0 – 13.0 % |
| Other oxides | 0–8 % |
| Physical material data | |
|---|---|
| Coefficient of expansion (100 – 400°C) | 10.15 ± 0.4 10-6 K-1 |
| Coefficient of thermal expansion (100 – 500°C) | 10.45 ± 0.4 10-6 K-1 |
| Flexural strength (biaxial) | ≥ 360 MPa |
| Density | 2.5 ± 0.1 g/cm³ |
Contact
Please note:
The color of the uncrystallized MO blanks is different from that of the HT and LT blanks. This is normal and has no influence on the final result.
Further information
* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.
Pictures and illustrations are exemplary. Colors, symbols, design, and information on the labels and/or packaging shown may differ from reality.