IPS e.max CAD*

Lithium disilicate for restorations with natural esthetics and strength

  • High-strength lithium disilicate glass ceramic with an end strength 360 MPa
  • Three degrees of translucency with up to 16 shades for highly esthetic results
  • Crystallization and glaze firing in one step – efficient and cost-effective at the same time
  • Excellent esthetics with optional individualization
  • Years of clinical experience and millions of restorations placed
  • Please note: The color of the precrystallized MO blanks is different from that of the HT and LT blanks. This is normal and has no influence on the final result

Indications

  • Single crowns (delivered in blue, precrystallized state)
  • Partial crowns, inlays, onlays, and veneers (delivered in blue, precrystallized state)
  • Three-unit bridges up to second premolar as terminal abutment (delivered in blue, precrystallized state)
  • Two-piece abutments for BEGO Semados® implants
Chemical composition  
SiO2 57.0 – 80.0 %
Li2O 11.0 – 19.0 %
K2O 0.0 – 13.0 %
Other oxides 0–8 %
Physical material data  
Coefficient of expansion (100 – 400°C) 10.15 ± 0.4 10-6K-1
Coefficient of thermal expansion (100 – 500°C) 10.45 ± 0.4 10-6K-1
Flexural strength (biaxial) ≥ 360 MPa
Density 2.5 ± 0.1 g/cm³

Please note:

The color of the uncrystallized MO blanks is different from that of the HT and LT blanks. This is normal and has no influence on the final result.

* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.

Images and illustrations are examples. Colors, symbols, designs, and information on the depicted labels and/or packaging may differ from reality.