Wirobond® M+
Milled cobalt-chrome restorations
- The simultaneous 5-axis milling guarantees optimal precision of fit – with every unit
- Can be veneered with commercially available ceramics (with a corresponding coefficient of thermal expansion)
- Each milling disc is re-densified – for a dense, high-lustre finish and more than 99% freedom from porosity
- High strength in all span sizes – therefore a very wide range of indications
- Corrosion-resistant and biocompatible
- Nickel- and beryllium-free
Indications
- Frames for partially and fully veneered restaurations with up to 16 units and up to four pontics
- Fully anatomical crowns and bridges with up to 16 units and up to four pontics
- One-piece abutments, bars, and occlusally screw-retained bridges
Extras
- Abutments with fully anatomical form
Contact
Downloads
Wirobond® M+
Processing information for CAD/CAM-produced restorations
BEGO CAD/CAM Product Catalogue
Valid from October 2025
BEGO Interface overview
Valid from: March 2025
Prosthetic Components and CAD Positioners
Allocation BEGO CADPositioner
| Chemical composition in % |
|---|
| Co 63.8 · Cr 24.8 · W 5.3 · Mo 5.1 · Si 1.0 |
| Alloy characteristics | |
|---|---|
| Type (according to ISO 22674) | 4 |
| Density | 8.6 g/cm³ |
| Modulus of elasticity | 235 GPa |
| 0.2% elongation limit (Rp0.2) | 415 MPa |
| Tensile strength (Rm) | 965 MPa |
| Hardness (HV 10) | 290 |
| Coefficient of thermal expansion (RT – 500°C) | 14.4 10-6 K-1 |
| Coefficient of thermal expansion (RT – 600 °C) | 14.6 10-6 K-1 |
Pictures and illustrations are exemplary. Colors, symbols, design, and information on the labels and/or packaging shown may differ from reality.