buy essay custom project online write review a concert for me online resume writing service english master thesis i want you to do my homework online homework help services dissertation prospectus irish

VarseoSmile Crown plus

The tooth-colored ceramic filled hybrid material for 3D printing
of permanent single crowns, inlays, onlays, and veneers

Advantages for the practitioner

  • Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time
  • High dimensional stability and strength of the printed objects due to high values of flexural strength and flexural modulus
  • The processing properties of the material are specially adapted to the dental application – therefore precise fit
  • Minimized resin sedimentation for easy handling, no mixing or shaking necessary with regular use
  • Easy to grind and polish by using standard tools
  • Seven shades according to the proven VITA* classical shades:
    A1, A2, A3, B1, B3, C2, D3
  • FDA 510(k) cleared and fulfills all the requirements for a Class II** and Class IIa*** medical device
  • Full integration into the digital workflow enables fast delivery of definitive restorations

Advantages for the patient

  • Excellent aesthetics thanks to a balanced ratio of opacity and translucency
  • Low tendency to age and discolor thanks to very low water absorption and water solubility
  • Low plaque accumilation due to smooth surface
  • High comfort thanks to low cold and heat sensitivity
  • Antagonist-friendly material with mechanical buffering effect – ideal for implant-supported crowns
  • Minimized formation of secondary caries thanks to a high adhesive bond with luting composites
  • High biocompatibility – therefore not cytotoxic, not genotoxic, not toxic, not irritating, and not sensitizing

Product details (Indication range/Shades)

Indication range

The VarseoSmile Crown plus material is used for 3D printing of permanent restorations such as single crowns, inlays, onlays, and veneers for anterior and posterior areas including occlusal surfaces. Use is contraindicated in the case of known allergies to one or more ingredients.

Technical specifications
Color A1, A2, A3, B1, B3, C2, D3
Density approx. 1.4 – 1.5 g/cm³
Layer thickness 50 μm
Viscosity 2,500 – 6,000 mPa*s
Flexural strength > 100 MPa
Flexural modulus 4,090 MPa
Water solubility < 1 µg/mm³
Water sorption < 10 µg/mm³
Wavelength 405 nm
Chemical composition
Esterification products of 4.4'-isopropylidiphenol, ethoxylated and 2-methylprop-2enoic acid. Silanized dental glass, methyl benzoylformate, diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide.
Total content of inorganic fillers (particle size 0.7 μm) is 30 – 50 % by mass.

Shades

VarseoSmile Crown plus is available in seven shades according to the VITA * classical shade system: A1 Dentin / A2 Dentin / A3 Dentin / B1 Dentin / B3 Dentin / C2 Dentin / D3 Dentin

Availability
Availability Contents*** REF
VarseoSmile Crown plus A1 0.5 kg bottle 41107
VarseoSmile Crown plus A2 0.5 kg bottle 41108
VarseoSmile Crown plus A3 0.5 kg bottle 41109
VarseoSmile Crown plus B1 0.5 kg bottle 41110
VarseoSmile Crown plus B3 0.5 kg bottle 41111
VarseoSmile Crown plus C2 0.5 kg bottle 41112
VarseoSmile Crown plus D3 0.5 kg bottle 41113
VarseoSmile Crown plus A1 0.25 kg bottle 41117
VarseoSmile Crown plus A2 0.25 kg bottle 41118
VarseoSmile Crown plus A3 0.25 kg bottle 41119
VarseoSmile Crown plus B1 0.25 kg bottle 41120
VarseoSmile Crown plus B3 0.25 kg bottle 41121
VarseoSmile Crown plus C2 0.25 kg bottle 41122
VarseoSmile Crown plus D3 0.25 kg bottle 41123

*** 0,25 kg bottles are exclusivly available for Varseo XS.

Notes for the user (Light-curing/Individualization with stains)

Light-curing

The light polymerization can be achieved with the BEGO Otoflash (two xenon stroboscopic lamps, flash frequency 10 Hz, light spectrum 300 – 700 nm) or with the HiLite Power*, Fa. Heraeus Kulzer* (one xenon stroboscope lamp, flash frequency 20 Hz, light spectrum 390 – 540 nm).

Required light-curing time
Light-curing device Light-curing Comments
BEGO Otoflash
(with protective gas)
2 × 1,500 flashes Turn object between the exposure cycles
HiLite Power 2 × 90 seconds

Individualization with stains

The individualization of the post-cured objects is possible with composite stains and is the responsibility of the user. Follow manufacturer‘s instructions.

Information for practitioners (Preparation/Luting)

Preparation

In order to ensure the successful production of restorations from VarseoSmile Crown plus the following points must be taken into account prior to preparation:

  • The preparation boundaries must be clearly visible
  • In terms of the preparation depth, the minimum wall thicknesses for the restoration of 1 mm must be observed
  • A chamfer or step preparation is recommended

As a rule, anatomically reduced preparation is recommended. Special care must be taken to ensure that no sharp angles or edges are created in order to avoid stress peaks in the frame material. These should be broken off before taking the impression using a suitable instrument, e.g., a flexible plastic diamond wheel.

Step preparation
Chamfer preparation
Avoidance of sharp edges

Luting

Permanent restorations made of VarseoSmile Crown plus can be attached using self-adhesive cements (e. g. RelyX Unicem*, 3M Espe*) or composite cement with a primer (e. g. Variolink Esthetic DC* and Monobond Plus*, Ivoclar Vivadent*). Observe the instructions for use of the luting agent.

Scientific Studies

More…

Free 3D Printed Sample

Kostenloser 3D-Probedruck

Order now…

Compatible 3D Printers at a Glance

Compatibility Overview 3D Printers and BEGO Varseo Materials

More…

Get started now!

You want to use the various advantages of our hybrid material for 3D printing of permanent restorations?
Your responsible BEGO Area Sales Manager and our Sales Team will be happy to assist you by e-mail or phone:

Downloads

More 3D printing materials

* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.

** Class II medical device as defined by section 201(h) of the Food, Drug & Cosmetic Act and CFR 21 part 872

*** Class IIa medical device as defined by Directive 93/42/EEC

Pictures and illustrations are exemplary. Colors, symbols, design, and information on the labels and/or packaging shown may differ from reality.