VarseoSmile Temp
The tooth-colored resin for 3D printing of temporary crown and bridge restorations, inlays, onlays, and veneers
Advantages for the laboratory
- Specially for the resin developed printing and processing parameters ensure an accurate fit and smooth production workflows with reproducible results at any time
- Easy finishing due to the the smooth surfaces of the printed objects
- Wide range of indications up to 7-unit bridges with a maximum of one pontic width
- Objects that have already been printed can be supplemented and repaired while maintaining original stability with VarseoSmile Temp or will simply be reprinted due to low material costs
- Extremely short fabrication times and low material consumption equate to cost-efficient production in the laboratory
- Three shades according to the proven VITA* classical shades: A2, A3, C2
- FDA 510(k) cleared and fulfills all the requirements for a Class II medical device**
Advantages for the patient
- The finished restoration can be attached using conventional temporary cements
- High biocompatibility – not cytotoxic, not genotoxic, not toxic, non-irritating, and non-sensitizing
- Esthetic temporaries with up to 12 months wear time
Color | A2, A3, C2, Bl |
Density | approx 1.4 – 1.5 g/cm³ |
Viscosity | 2,500 – 6,000 mPa∙s |
Flexural strength | ≥ 100 MPa |
Availability | Contents* | REF |
---|---|---|
VarseoSmile Temp A2 | 500 g bottle | 41022 |
VarseoSmile Temp A3 | 500 g bottle | 41023 |
VarseoSmile Temp C2 | 500 g bottle | 41024 |
VarseoSmile Temp BL | 500 g bottle | 41026 |
VarseoSmile Temp A2 | 250 g bottle | 41102 |
VarseoSmile Temp, A3 | 250 g bottle | 41103 |
VarseoSmile Temp, C2 | 250 g bottle | 41104 |
VarseoSmile Temp BL | 250 g bottle | 41106 |
* The use of the 250 g bottles is recommended for the Varseo XS 3D printer.
3D Printers – for Processing BEGO 3D Printing Materials
Compatible 3D Printers at a Glance
More 3D printing materials
VarseoSmile TriniQ
VarseoSmile
Crown plus
VarseoSmile Temp
VarseoSmile Teeth
VarseoWax Model
VarseoWax CAD/Cast
VarseoVest P plus
VarseoVest C&B
* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.
** Medical device as defined by section 201(h) of the Food, Drug & Cosmetic Act
Images and illustrations are examples. Colors, symbols, designs, and information on the depicted labels and/or packaging may differ from reality.
VarseoSmile Temp is distributed by Formlabs as: Temporary CB